Cold storage installation process, the use of cold storage distribution box is a very important content, but most people for the normal operation of the cold storage distribution box is not a very good understanding, today we will follow the refrigeration experts to understand the correct operation of the cold storage distribution box.
After the installation of cold storage, cold storage distribution box outside the wiring must use the correct method to protect, such as steel pipe hose this some wiring, we had better be placed in a place that is not easy to damage, otherwise it may lead to cold storage distribution box wiring unnecessary damage.
After the installation of cold storage, power distribution box machine tool between the power line is best placed in the middle of the bridge, the bridge also need to use the base to play a supporting role, it is recommended that the use of the bridge, never and the ground direct contact.
Cold storage power distribution box outside the piping also need to achieve uniformity, which is also an important element after the installation of cold storage. If there is a phenomenon of non-uniformity, then in the later use, recurrent are faulty problems, wasting our unnecessary maintenance costs, this point, I hope that we should all master.
Cold storage installation, for the distribution box packer or other heating equipment connections need to pay attention to, wiring, need to stay away from places near the heating, wiring is best placed inside the connection box, the heater’s connection line is best to use glass or ceramic pipe wire, in order to be safe not to use flammable wire.
Cold storage power distribution box outside so have to wire in the link need to be placed in the connection box, which is also an important part of the cold storage installation process, in addition, the middle of the connection line can not have a joint.
Cold storage distribution box all the connection box, wire entrance protection level, all need to be in IP55 above the standard, this is a cold storage installation we need to pay attention to a content.
Relay combined terminal block is best to use two wires for linking, if you need to link more than three wires, it is best to set up other terminal blocks, otherwise it will also affect the normal use of the distribution box.
Inductor in the wiring if placed in an easily damaged place, it is best to use a hose to play a protective role, the use of hoses, it is best to be directly placed in the root of the inductor, this one content is also a cold storage installation need to pay attention to.
At the same time, after the installation of cold storage, for the normal use of the distribution box, need to check regularly, once the hidden danger, must be dealt with at the first time, otherwise for the normal use of the impact will be caused, and may even cause economic losses, I hope that you must pay attention to the inspection.
The above is the cold storage installation of the correct operation of the knowledge of the distribution box, in order to let the role of the distribution box can be played normally, some of the content we need to pay attention to. This will play a supporting role for the normal use of cold storage.
Post time: Aug-02-2023
