Matters needing attention for the construction of cold storage in the basement

1, basement insulation: basement insulation library body we recommend the use of polyurethane double-sided colour steel cold storage board, polystyrene double-sided procurement cold storage board or polyurethane wall spraying. If the basement area is relatively large, it is recommended that the bottom of the extruded plastic board, reinforced cement network, and then the use of pouring concrete floor insulation measures to deal with. The better the insulation is done, the better the cooling effect, the better the insulation is done, the better the relative equipment maintenance, the better the insulation is done, the better the energy-saving effect.
2, refrigeration equipment installation: relative to the basement cold storage installation, refrigeration equipment installation is quite important.
(1) If the refrigeration equipment installed in the basement outside the machine, will certainly involve heat dissipation problems, know the principle of people know that refrigeration equipment must have external exhaust heat fan, hot air can be discharged out of the cold air cooling, if the refrigeration equipment is installed in the basement inside the hot air does not go out will affect both the cooling effect, but also affect the service life of refrigeration equipment.
(2) If the refrigeration equipment is installed outside the basement, it will inevitably far away from the distance between the outside machine and the inside machine, increase the length of the copper pipe, the closer the outside machine and the inside machine the better the refrigeration effect, far away from the opposite will affect the refrigeration effect, but also reduce the service life of the equipment.
(3) basement construction of cold storage equipment installation selection of the best length of the outside and inside the machine distance should not exceed 10 metres away, so the best practice recommended: refrigeration equipment installed outside the outside, and the internal link if not more than 10 metres away, there is no problem, if more than 10 metres to choose the optimal distance between the basement and the ground to play a hole in the extension pipe link processing, outside the machine must be built to prevent the rain and snow weather rain water Pipe into the warehouse.